COMPUTERISED FULLY AUTOMATIC BRINELL HARDNESS TESTING MACHINE
[ MODEL - B3000PCFA]
   
                                   
   
 
Computerised Universal Testing UNITEK & UTE Machines (with 95 New Series Panel) Download Product Catalogue Request Quote Printer Friendly Page

Dynamic Balancing Machine with Microprocessor Based Measuring Panel ( Hard Bearing Models - HDCM)

Machine provided with Optional Vertical Drilling attachment  
Machine provided with optional vertical drilling attachment   Dynamic Balancing Machine Model : HDCM
 
HDCM-8500 Panel
HDCM- 8500 Panel
Machines model HDCM are belt driven horizontal type photo scanning Universal Hard Bearing Balancing Machine, provided with microprocessor based measuring panel HDCM – 8500 suitable for balancing different shapes of rotors, of electrical machines, Cylinders, fly wheel, rotor of centrifugal pumps and other type of rotating machines.
These machines are very simple in design. No drive coupling / adaptor etc. required to connect to the rotor to be balanced. It has following advantages -
1) Cost saving on manufacturing of precision adaptor to connect drive coupling to rotor.
2) Any rotor can be balanced without losing time in manufacturing of adaptor.
3) The balancing accuracy of rotor not disturbed due to unbalance in drive coupling / adaptor.
4) Belt drive machine are more accurate (about 5 times) as compared to end drive machine.
The machines features a very simple operation. The working cycle is fully automatic. From safety point of view a double press push button starts machine, Measures and stores the unbalance values on DPMs for two Plane simultaneously and stops machine. Key board facility provided in measuring panel for correct data feeding of rotor with 1 digit accuracy for its dimensions like A, B, C, R1 & R2. Tolerance limits of both correction planes i.e. +11 & +12 can be feed so that when rotor is balanced within the limits respective LEDs glow up, indicating no further correction necessary. For other details please refer “ features of measuring panel HDCM-8500”
Standard Features :
1) Digital display for unbalance indication
Amount and angle for unbalance for both planes displayed on separate DPMs. Hence linear accuracy is very goos as compared to analog meter + digit for amount and + degree for angle.
2) Digital display for RPM indication
A DPM is provided to indicate balancing speed continuously as a standard feature.
3) Auto Stop
No necessity to stop machine once started. It stops automatically after stabilization of unbalance results.
4) Simultaneous Indication
Amount and angle of unbalance in both planes displayed simultaneously and remains displayed (stored ) till next run. This totally eliminates operation of plane selector and reduces additional time for stabilization of readings in other plane.
5) Key-Board
Data of rotor dimensions and balancing tolerance i.e. values of A, B, C, R1, R2, t11, t12 are fed by key operation. Hence accuracy of data feedings accurate up to 1 digit.
6) Tolerance Indicators
Separate LEDs are provided for both planes which glow when unbalance is reduced within balancing tolerance.
7) Auto Range
Depending upon whether unbalance amount is more or less a respective course or fine range gets automatically selected till rotor gets balanced within tolerance limits, Multiplier operation is totally eliminated.
8) Data store
Data is provided with 'Self check' mode which checks proper functioning of digital display. LED's is cycle operation. This helps immediate fault detection.
9) Self Check
Panel is provided with ‘self-check’ mode which checks proper functioning of digital displays, LEDs is cyclic operation (optional). This helps immediate fault detection.
Additional Featureson demand :
Printer :
A matrix printer can be connected through ‘FIE’ software. It shows runs till rotor is balanced within balancing tolerance.
Component Indication :
‘FIE’ software specially developed with 3-99 component indication, is suitable for balancing of rotor with fixed locations for balancing correction.
Unbalance Correction :
• Drill attachment 8mm capacity portable drill with supporting overhead railing.
• Separate drilling attachment 19mm. Capacity with a vertical drilling head, manual.
• Portable type reveting hammer (piston type) speed 1800 blows/minute, capacity 6mm in a aluminum suspected from top with rail.
• Tangential belt drive, in addition to standard (suitable for a particular type of rotor for production balancing)
• Longitudinal movement of right hand pedestal by chain & sprocket attachment.
Technical Specifications :
"FIE" Horizontal  Hard Bearing Belt Drive Dynamic Balancing Machines.
Models
Unit
HDCM-10
HDCM-30
HDCM-50
HDCM-100
HDCM-300
Weight of Rotors
kg
0.2-10
0.3-30
0.5-50
1-100
3-300
Max. wt. on each pedestal
kg
7.5
22.5
30
75
180
Max. diameter of rotor
mm
250
500
500
800
1000
Max. distance between bearings
mm
300
1200
1200
1200
2100
Min. distance between bearings ( drive outside pedestal )
mm
20
50
50
50
150
Shaft diameter
mm
5-50
5-50
5-50
15-80
20-120
* Balancing speed range ( n )
RPM
750-3000
500-2000
500-2000
400-1600
300-1500
Power of drive motor
HP
0.33
0.75
0.75
1.5
3
Acceleration capability ( gs2n2 )
kgm2n2
0.29x106
0.37x106
0.37x106
0.88x106
3.9x106
Min. Unbalance mass measured
g
0.01
0.1
0.1
0.1
0.1
Max. Unbalance mass measured
kg
0.4
4
4
4
4
Unbalanced reduction ratio
%
95
95
95
95
95
Min. Achievable unbalance per rotor wt.
( For max. rotor wt. )
gmm / kg or micron.
0.2
0.2
0.2
0.2
0.2
• The balancing speed depends upon selection of the rotor diameter, where drive is to be given and the motor pulley diameter.
• All the machines above operate on mains supply of 400 to 440 V, 3Ø, 50 cycles.
• Due to constant R & D, specifications and features are subject to change without notice. The dimensions given above are approximate.
 
 

Universal Testing Machines | Mechanical Type Universal Testing Machines | Electronic Type Universal Testing Machines | Electronic UTM [Model : UTE] | Electronic UTM [Model : UTES (Servo)] | Electronic Universal Testing Machines [Model : UTE 40 HGFL]  • Electro-Mechanical Universal Testing Machines |Model Unitek 9400 Series with PC Interface & Real Time Graph [Panel / PC Controlled] | Model Unitek 9700 Series with Interface & Real Time Graph [Panel / PC Controlled]  • Electro-Mechanical PC Control Universal Testing Machines | Unitek 9500 Series | Mechanical Extensomedter [Model : EM-1] | Electronic Mechanical Extensometer [Model : EE-2]  • Compression Testing Machines | Electronic Compression Testing Machines | Electronic Four Column Compression Testing Machines [Model : CTE 200 & 300 4C]  • Spring Testing Machines (Model : STE) | Laminated Spring Testing Machines  • Torsion Testing Machines | Electronic Torsion Testing Machines [Model : TTE]  • Erichsen Testing Machines  • Impact Testing Machines [Model : IT-30 & IT-30 (D)]  • Hardness Testing Machines | Rockwell Hardness Testing Machines | Hardness Testing Machines Series - RASN [For Rockwell, Rockwell Superficial & Brinell Testing] | Hardness Testing Machines For Rockwell, Rockwell Superficial & Rockwell cum Brinell Testing [Series : RASNE] | Vickers Hardness Tester [Model : VM-50] | Computerised Hardness Tester [Model : VM 50 PC] | Brinell Hardness Tester [Model : B3000] | Computerised Brinell Hardness Tester [Model : B3000-PC] | Computerised Brinell Image Analysis System [B.I.A.S] | Computerised Fully Automatic Brinell Hardness Testing Machines [Model : B3000-PC-FA] | Portable Hardness Tester [Model : PR 1]  • SAROJ make Rockwell Hardness Testing Machines | Hardness Testers [Models : RAS, RAB-1, RAB-250, Twin]  • SAROJ make Brinell Hardness Tester | Brinell Hardness Tester [Model : B 3000 [O]] | Brinell Hardness Tester [Model : B 3000 [H]]  • Dynamic Balancing Machines with Microprocessor Based Measuring Panel | Dynamic Balancing Machine Model HDM | Dynamic Balancing Machine Model HDCM | Dynamic Balancing Machine Model HDVM & HDVTM  • Computerised MicrovickersHardness Tester [Model : MV-1 PC]


 
 
Designed by : MID   Hosted by : GID   Promoted by : PBD