COMPUTERISED FULLY AUTOMATIC BRINELL HARDNESS TESTING MACHINE
[ MODEL - B3000PCFA]
   
                                   
   
 

Electronic Universal Testing Machines ( Models : UTE 40 HGFL )

Electronic Universal Testing Machine (Models:UTE 40 HGFL)

Electronic Universal Testing Machines ( Models : UTE 40 HGFL )
FIE introduces its new model of universal testing machine with design flexibility, a modern appearance and high performance electronics. Some of the features include-
 
Features :
• Open type crosshead.
• Hydraulic wedge action grips.
• Load cell technology.
• Long test stroke and test space.
• Straining at variable speed to suit a wide range of materials.
• Touch screen control panel Black and White or colour with printing & computer connectivity.
• Tension, Compression and Transverse test facility.
 
Princlple of Operation :
A static hydraulic technology is used to apply a tensile or compression load to the test specimen. Double acting cylinder operates crossheads precisely by using the hydraulic controls. Displacement is measured by an encoder and load is precisely measured using Load cell.
 
Machine consist of :
Straining Unit :
Typical HGFL design includes a rigid two column frame, open type crossheads with hydraulic wedge action grips and a double acting cylinder.
 
Control Panel :
The control panel consists of a power pack with drive motor, oil tank and two separate manifolds with solenoid valves.
A) Power Pack :
The power pack is a dual output type. The hydraulic pump provides continuously non - pulsating oil flow hence the load application is very smooth.
B) Hydraulic Controls :
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The requlation of the oil flow is infinitely variable. Up and down direction of the crosshead and jaw actuation cylinders are by means of solenoid valve
 
Electronic Control Panel :
Series Universal 2011 (TS) PLC based panel incorporating state of art technology with following features
• Front panel 5.7" touch screen display.
• Data entry of test parameters including preload, rupture %, Safe Load & Specimen data etc.
• Online graph of load Vs Displacement directly on screen.
• Printer port for printer interface with graph & result print out.
• RS 232 serial port. Optional windows based software available for .....
   Online graph on PC, Data analysis, Statistics, Point tracing, superimposing graphs to compare with standard, zooming graph etc.
 
 
Optional Software packages on PC
The UNIVERSAL 2011 (TS) series control panel can be hooked to any PC using RS232 communication port. FIE offers different exhaustive application, windows based software packages with real time graph on PC to enable the user to effectively evaluated different parameters.
 
The following features include :
• Real time graph, user friendly software
• Extensive graphics on screen for curve plotting, magnification and zooming
• Software features include graph comparison, point tracing facility. Different units selection for load and displacement.
• Statistical evaluation with waterfall diagram, mean deviation, frequency distribution, skew diagram, histogram. Also calculates max. value, min. value, mean value, variance, standard deviation. (other statistical parameters on request). Selectable batch & statistical printouts.
• Evaluation of wide range of user selectable parameters such as % elongation, % reduction in area, young's modulus, yield stress, proof stress etc.
• Software packages for shear, bend, torsion, rubber, textile testing etc.
• Custom built application software to suit customer requirements.
 
Accuracy and Calibration :
FIE Electronic Universal testing machine is closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Machine is then calibrated over each of its measuring range in accordance with the procedure laid down in British standards 1610: Part1: 1992 and IS 1828: Part1: 1991
FIE Electronic Universal Testing Machine complies with Grade "AD of BS: 161 0:Part1 :1992 and class 1 ofIS-1828-Part1 :1991.
PC and Printer is not in our standard scope of supply.
 
Specifications :
 
Description
Unit
Specification
Maximum Capacity
kN
400
Measuring Range
kN
0-400
Load Resolution (20,000 counts full scale)
N
20
Resolution of Piston movement (Displacement)
mm
0.01
Clearance for tensile test at fully descended working piston
mm
500
Clearance between columns
mm
500
Ram Stroke
-
500
Straining/Piston speed (at no load)
mm/min
140 mm/min
Connected Load
3 HP, 400-440V, 3 Phase
Dimensions (L x W x H)
mm
2410 x 750 x 2910
Standard Accessories : For Tension test
-
-
Clamping jaws for round specimen of diameters
mm
10-30
30-40
Clamping Jaws for flat specimen of thickness Width
mm
0-15
15-30
88
For Compression test
Pair of compression plate of dia
mm
120
 
Special Accessories & Option: Electronic Extensometer, Shear Test Attachment, Mechanical Extensometer.
FIE reserves the rights of change in the above specifications due constant improvement in design. The dimensions given above are all approximate.
 
 

Universal Testing Machines | Mechanical Type Universal Testing Machines | Electronic Type Universal Testing Machines | Electronic UTM [Model : UTE] | Electronic UTM [Model : UTES (Servo)] | Electronic Universal Testing Machines [Model : UTE 40 HGFL]  • Electro-Mechanical Universal Testing Machines |Model Unitek 9400 Series with PC Interface & Real Time Graph [Panel / PC Controlled] | Model Unitek 9700 Series with Interface & Real Time Graph [Panel / PC Controlled]  • Electro-Mechanical PC Control Universal Testing Machines | Unitek 9500 Series | Mechanical Extensomedter [Model : EM-1] | Electronic Mechanical Extensometer [Model : EE-2]  • Compression Testing Machines | Electronic Compression Testing Machines | Electronic Four Column Compression Testing Machines [Model : CTE 200 & 300 4C]  • Spring Testing Machines (Model : STE) | Laminated Spring Testing Machines  • Torsion Testing Machines | Electronic Torsion Testing Machines [Model : TTE]  • Erichsen Testing Machines  • Impact Testing Machines [Model : IT-30 & IT-30 (D)]  • Hardness Testing Machines | Rockwell Hardness Testing Machines | Hardness Testing Machines Series - RASN [For Rockwell, Rockwell Superficial & Brinell Testing] | Hardness Testing Machines For Rockwell, Rockwell Superficial & Rockwell cum Brinell Testing [Series : RASNE] | Vickers Hardness Tester [Model : VM-50] | Computerised Hardness Tester [Model : VM 50 PC] | Brinell Hardness Tester [Model : B3000] | Computerised Brinell Hardness Tester [Model : B3000-PC] | Computerised Brinell Image Analysis System [B.I.A.S] | Computerised Fully Automatic Brinell Hardness Testing Machines [Model : B3000-PC-FA] | Portable Hardness Tester [Model : PR 1]  • SAROJ make Rockwell Hardness Testing Machines | Hardness Testers [Models : RAS, RAB-1, RAB-250, Twin]  • SAROJ make Brinell Hardness Tester | Brinell Hardness Tester [Model : B 3000 [O]] | Brinell Hardness Tester [Model : B 3000 [H]]  • Dynamic Balancing Machines with Microprocessor Based Measuring Panel | Dynamic Balancing Machine Model HDM | Dynamic Balancing Machine Model HDCM | Dynamic Balancing Machine Model HDVM & HDVTM  • Computerised MicrovickersHardness Tester [Model : MV-1 PC]