Computerised Fully Automatic Brinell Hardness Tester Model - B 3000-PC-FA

 
Computerised Fully Automatic Brinell Hardness Tester Model - B 3000-PC-FA
Computer, Ups and Computer table is not part of the Machine
 
'FIE'Computerised Fully Automatic Brinell Hardness Tester, Model B3000-PC-FA is fabricated from steel plates and is designed for precise loading system. It is fully automatic machine for production testing. Once the job is placed on testing table and press "Cycle Start" button. The job is raised and brought in contact with clamping device. Then identor is swivelled and brought in vertical loading position. The loading operation starts. After preset dwelling timer, unloading operation starts. As soon as load is fully removed, the indentor is swivelled and the image is digitalized using a CCD camera fitted on machine and captured by the PC.
The diameter of indentation is measured by PC and the Brinell Hardness is displayed on monitor with the help of "State of Art" technology software. The job is lowered down and here the auto cycle is over.
Operationally the machine can be operated after a lapse of interval without operation of push button, so that operator has only to do loading and unloading of job on machine.
This tester is designed for measuring hardness of metallic parts with wide testing range from soft to hard and its accurate results are widely acclaimed.
This tester conforms to IS:2281, BS:10003 and ASTME-10.
 
Features :
• Fully automatic machine for production testing.
• Fully computerised (PC based) Brinell Hardness Tester.
• Direct and accurate measurement of Brinell hardness number using "State of Art" image processing technology.
• Wide testing range : From soft metal such as lead up to hardest, like tempered steel.
• High accuracy and repeatability of measurement at all loads.
• Advanced Window XP based software :
- Latest GUI features with user friendly software.
- On line indentation setting and focusing on PC monitor.
- Advanced image processing : Algorithms implemented for precise calculations of hardness numbers with various options to cover all ranges of specimens.
- Batch file processing : Option for data/storage and reports generation.
- Statical Evaluation : Software for calculating standard deviation, mean, medium, frequency distribution graph, variation graph etc.
- Calibration mode facility.
- Extendibility for future advanced image processing analysis, requirements.
- "Auto measurement start" from machine.
 
Scope of Supply :
• Basic machine with CCD camera, optics with illumination system and connecting cable.
• PCI video capture card with driver software.
• PC and Windows operating system is to be procured by customer.
 
 
Technical Data :
Load Range
250 to 3000 kgf in stages of 250kgf
Max. test height
380 mm
Dept. of throat
200 mm
Machine height ( approx )
1185mm
Net Wight ( approx )
450 kg.
Drive Power
0.66 HP
Mains supply
415V, 50Hz, 3phase
Measuring accuracy with CCD camera and built in optics
0.01 mm
Dwell timer
1 to 99sec.
Raising/lowering
240 mm/min
 
Standard Accessories :
Testing Table 200mm Ø
1 No.
Testing table 70mm Ø
1 No.
Ball holder 5mm
1 No.
Ball holder 10mm
1 No.
Test Block HB-5/750
1 No.
Test Block HB-10/3000
1 No.
Allen Spanner
4 Nos.
Telescopic cover for elevating screw protection
1 Set
Instruction Manual
1 No.
 
 

  
 

Universal Testing Machines | Mechanical Type Universal Testing Machines | Electronic Type Universal Testing Machines | Electronic UTM [Model : UTE] | Electronic UTM [Model : UTES (Servo)] | Electronic Universal Testing Machines [Model : UTE 40 HGFL]  • Electro-Mechanical Universal Testing Machines |Model Unitek 9400 Series with PC Interface & Real Time Graph [Panel / PC Controlled] | Model Unitek 9700 Series with Interface & Real Time Graph [Panel / PC Controlled]  • Electro-Mechanical PC Control Universal Testing Machines | Unitek 9500 Series | Mechanical Extensomedter [Model : EM-1] | Electronic Mechanical Extensometer [Model : EE-2]  • Compression Testing Machines | Electronic Compression Testing Machines | Electronic Four Column Compression Testing Machines [Model : CTE 200 & 300 4C]  • Spring Testing Machines (Model : STE) | Laminated Spring Testing Machines  • Torsion Testing Machines | Electronic Torsion Testing Machines [Model : TTE]  • Erichsen Testing Machines  • Impact Testing Machines [Model : IT-30 & IT-30 (D)]  • Hardness Testing Machines | Rockwell Hardness Testing Machines | Hardness Testing Machines Series - RASN [For Rockwell, Rockwell Superficial & Brinell Testing] | Hardness Testing Machines For Rockwell, Rockwell Superficial & Rockwell cum Brinell Testing [Series : RASNE] | Vickers Hardness Tester [Model : VM-50] | Computerised Hardness Tester [Model : VM 50 PC] | Brinell Hardness Tester [Model : B3000] | Computerised Brinell Hardness Tester [Model : B3000-PC] | Computerised Brinell Image Analysis System [B.I.A.S] | Computerised Fully Automatic Brinell Hardness Testing Machines [Model : B3000-PC-FA] | Portable Hardness Tester [Model : PR 1]  • SAROJ make Rockwell Hardness Testing Machines | Hardness Testers [Models : RAS, RAB-1, RAB-250, Twin]  • SAROJ make Brinell Hardness Tester | Brinell Hardness Tester [Model : B 3000 [O]] | Brinell Hardness Tester [Model : B 3000 [H]]  • Dynamic Balancing Machines with Microprocessor Based Measuring Panel | Dynamic Balancing Machine Model HDM | Dynamic Balancing Machine Model HDCM | Dynamic Balancing Machine Model HDVM & HDVTM  • Computerised MicrovickersHardness Tester [Model : MV-1 PC]