COMPUTERISED FULLY AUTOMATIC BRINELL HARDNESS TESTING MACHINE
[ MODEL - B3000PCFA]
   
 
   
 

Mechanical & Electronic Mechanical Extensometer (Model : EM-1 & EE-2)

 
Mechanical Extensometer Model : EM-1
Electronic Mechanical Extensometer Model : EE-2
Mechanical Extensometer Model : EM-1
Electronic Mechanical Extensometer Model : EE-2
 
 
Mechanical Extensometer (Model : EM-1)
 
It is essential to measure the elongation of test specimen under load, to have it's mechanical properties. FIE Extensometer Model EM-1 is intended to serve the above purpose.
 
So that the knife edges bite the specimen to avoid any slip. The upper edges are adjustable to provide different guages lengths for measurement. As deformation takes place the lower knife edges transfer the movement to the dial guages and the deformation of specimen is shown on dials, so that the change in length of specimen by 1/100mm, equals to one division of the graduation on dial.
 
Technical Data:
1)
Measuring Range
0 to 3 mm
2)
Least Count
1/100 mm
3)
Guage Length (Adjustable)
30 to 120 mm
4)
Thickness or diameter of specimen
1 to 20 mm
5)
Dimensions - B x D x H
120 x 50 x 150 mm Approx.
6)
Net Weight
0.3 kg Approx.
 
• Due to constant R & D, specifications and features are subject to change without notice.
• The diamensions given above are approximate.
 
Electronic Mechanical Extensometer (Model:EE-2)
 
• The electronic exensometer, Model EE-2 is manufactured as per IS:12872:1990 & ISO 9513:1989 in class 1 accuracy.
• This equipment is basically used with Universal Testing Machines for tension test, It is used for measuring young's modules, proof stress or yield stress.
• EE-2 extensometer requires electronic signal conditioning PCB to interface it with UTM electronic panel.
 
Technical Data:
1)
Measuring Range (Extension)
0-2 mm
2)
Least Count
0.001 mm
3)
Guage Length (Adjustable)
25, 30, 45 & 50 mm
4)
Thickness or diameter of specimen
1 to 20 mm
5)
Excitation
+ 5 VDC
6)
Out put (Approx)
20 mV full scale
 
Optional Accessories :
• EE-2 with guage length 25.4, 62.5, 70 & 80 mm.
• Specimen thickness or dia 4 to 40 mm & 4 to 50 mm.
 
 

  
 

Universal Testing Machines | Mechanical Type Universal Testing Machines | Electronic Type Universal Testing Machines | Electronic UTM [Model : UTE] | Electronic UTM [Model : UTES (Servo)] | Electronic Universal Testing Machines [Model : UTE 40 HGFL]  • Electro-Mechanical Universal Testing Machines |Model Unitek 9400 Series with PC Interface & Real Time Graph [Panel / PC Controlled] | Model Unitek 9700 Series with Interface & Real Time Graph [Panel / PC Controlled]  • Electro-Mechanical PC Control Universal Testing Machines | Unitek 9500 Series | Mechanical Extensomedter [Model : EM-1] | Electronic Mechanical Extensometer [Model : EE-2]  • Compression Testing Machines | Electronic Compression Testing Machines | Electronic Four Column Compression Testing Machines [Model : CTE 200 & 300 4C]  • Spring Testing Machines (Model : STE) | Laminated Spring Testing Machines  • Torsion Testing Machines | Electronic Torsion Testing Machines [Model : TTE]  • Erichsen Testing Machines  • Impact Testing Machines [Model : IT-30 & IT-30 (D)]  • Hardness Testing Machines | Rockwell Hardness Testing Machines | Hardness Testing Machines Series - RASN [For Rockwell, Rockwell Superficial & Brinell Testing] | Hardness Testing Machines For Rockwell, Rockwell Superficial & Rockwell cum Brinell Testing [Series : RASNE] | Vickers Hardness Tester [Model : VM-50] | Computerised Hardness Tester [Model : VM 50 PC] | Brinell Hardness Tester [Model : B3000] | Computerised Brinell Hardness Tester [Model : B3000-PC] | Computerised Brinell Image Analysis System [B.I.A.S] | Computerised Fully Automatic Brinell Hardness Testing Machines [Model : B3000-PC-FA] | Portable Hardness Tester [Model : PR 1]  • SAROJ make Rockwell Hardness Testing Machines | Hardness Testers [Models : RAS, RAB-1, RAB-250, Twin]  • SAROJ make Brinell Hardness Tester | Brinell Hardness Tester [Model : B 3000 [O]] | Brinell Hardness Tester [Model : B 3000 [H]]  • Dynamic Balancing Machines with Microprocessor Based Measuring Panel | Dynamic Balancing Machine Model HDM | Dynamic Balancing Machine Model HDCM | Dynamic Balancing Machine Model HDVM & HDVTM  • Computerised MicrovickersHardness Tester [Model : MV-1 PC]