COMPUTERISED FULLY AUTOMATIC BRINELL HARDNESS TESTING MACHINE [ MODEL - B3000PCFA]
   
 
 

 

Saroj Make Rockwell Hardness Testing Machine

Hardness Testers ( Models : RAS, RAB-1, RAB-250, Twin )
 
RAS
RAB - 250
RAB - TWIN
RAS
RAB - 250
RAB - TWIN
 
Features :
Rockwell, Rockwell Brinell Combined, Rockwell/Rockwell Superficial Combined System Hardness Testers.
SAROJ Hardness Testers, Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models are suitable for testing hardness of metals sand alloys of all kinds hard or soft, whether flat, round, or irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat treatment departments, factories etc.
These testers strictly confirms to IS : 1586-2000, ASTM : E 18 for Rockwell Superficial Test and IS : 2281 -2005, ASTM : E 10 for Brinell test.
 
Model RAS :
Model RAB-1
Model TWIN
Automatic load selection with automatic zero
setting dial gauge.
Automatic load selection & automatic zero setting dial gauge. Facility for Brinell tests with 187.5 kgf. load with 2.5 mm Ball indicator, additional load
250 kgf. with 5mm Ball indentor for testing
hardness of non- ferrous metals.
Automatic load selection with automatic zero
setting dial gauge.
Manual operation.
Manual operation.
Diamond holder is guided in a ball cage, which enables testing of small pins having dia. Less
than 6 mm (up to 3mm dia.)
Model RASM (Motorised) :
Model RAB 250
Similar to 'RAS' but motorised model.
Semiautomatic operation for production testing. Drive motor single phase 230 V 50 Cycles.
Similar to 'RAB-1' but of bigger capacity. Diamond holder is guided in a ball cage, which enables testing of small pins having dia less than 6 mm
( up to 3 mm dia.)
 
Standard Accessories :
 
Model
RAS /RASM
RAB-1 / RAB-250
TWIN
Testing table 50mm dia
1 pc.
1 pc.
1 pc.
Testing Table 38mm dia with 'V groove for round jobs 6 to 45mm dia.
1 pc.
1 pc.
1 pc.
Diamond Indentor 120°
1 pc.
1 pc.
1pc.
Stell ball Indentor 1/16"
1 pc.
1 pc.
1 pc.
Test Block Rockwell 'C
1 pc.
1 pc.
1 pc.
Test Block Rockwell 'B'
1 pc.
1 pc.
1 pc.
Test Block Rockwell Superficial 'N'
Nil
Nil
1 pc.
Allen Spanners
5 pcs
5 pcs
5 pcs
Clamping Device
1 pc.
1 pc.
1 pc.
Dash Pot Oil
1 Bottle
1 Bottle
1 Bottle
Rubber bellow for elevating screw protection
1 pc.
1 pc.
1pc.
Instruction Manual
1 Book
1 Book
1 Book
Brinell Microscope
Nil
1 pc.
Nil
Stell Ball Indentor 2.5mm
Nil
1 pc.
Nil
Test Block HB 2.5/187.5
Nil
1 pc.
Nil
Stell Ball Indentor 5mm
Nil
1 'pc. -.
Nil
 
Technical Data :
 
Model
Unit
RAS
RASM
RAB-1
RAB-250
TWIN
Loads
kgf.
60, 100 150
60, 100 150
60, 100, 150, 187.5, 250
60, 100, 150, 187.5, 250
15, 30, 45 (Rockwell Superficial) 60,100,150 (Rockwell)
Initial Load
kgf.
10
10
10
10
3 (Rockwell Superficial) 10 (Rockwell)
Max. Test Height
mm.
230
230
230
330
330
Depth of Throat
mm.
133
133
133
150
150
Max. depth ot elevating screw below base
mm.
240
240
240
355
355
Size of base (approx.)
mm
170x430
170x430
170x430
210x474
210x474
Machine Height (approx.)
mm
655
655
655
850
850
Nett Weight (approx.)
kg.
65
65
65
100
100
 
 
Loads & Indentors for 'Saroj' Hardness Testers for Rockwell & Brinell Tests.
 
Total load in kgf. (Initial load 10 kgf.)
60
100
150
187.5
250
Indentor
Diamond 120°
Ball 1/16" Ø
Diamond 120°
Ball 2.5 mm  Ø
Ball 5mm
Test Scales
Rockwell A
Rockwell B
Rockwell C
Brinell,F/D2=30
Brinell, F/D2 =10
Suitable for
Tests on case hardened stell
Annealed, Ferrous & non ferrous metals
Annealed, hardened & tempered deep case hardened steel
Annealed steel & cast irons
Copper, Copper alloys & Al. alloys
 
Use of combinations of 60, 100 & 150 kgf. loads against Diamond Indentor and 1/16" stell ball indentor permit carrying out tests on Rockwell D, F & G scales. By use of 1/18", 1/4" & 1/2" dia. ball indentors in combinations of 60, 100 & 150kgf. loads, tests can be carried out on Rockwell E, H, K, L, M, P, R, S & V scales also.
 
Due to constant R & D, specifications and features are subject to change without notice. The diamension given are approximate.
 
 
 

• Universal Testing Machines | Mechanical Type Universal Testing Machines | Electronic Type Universal Testing Machines | Electronic UTM [Model : UTE] | Electronic UTM [Model : UTES (Servo)] | Electronic Universal Testing Machines [Model : UTE 40 HGFL]  • Electro-Mechanical Universal Testing Machines |Model Unitek 9400 Series with PC Interface & Real Time Graph [Panel / PC Controlled] | Model Unitek 9700 Series with Interface & Real Time Graph [Panel / PC Controlled]  • Electro-Mechanical PC Control Universal Testing Machines | Unitek 9500 Series | Mechanical Extensomedter [Model : EM-1] | Electronic Mechanical Extensometer [Model : EE-2]  • Compression Testing Machines | Electronic Compression Testing Machines | Electronic Four Column Compression Testing Machines [Model : CTE 200 & 300 4C]  • Spring Testing Machines (Model : STE) | Laminated Spring Testing Machines  • Torsion Testing Machines | Electronic Torsion Testing Machines [Model : TTE]  • Erichsen Testing Machines  • Impact Testing Machines [Model : IT-30 & IT-30 (D)]  • Hardness Testing Machines | Rockwell Hardness Testing Machines | Hardness Testing Machines Series - RASN [For Rockwell, Rockwell Superficial & Brinell Testing] | Hardness Testing Machines For Rockwell, Rockwell Superficial & Rockwell cum Brinell Testing [Series : RASNE] | Vickers Hardness Tester [Model : VM-50] | Computerised Hardness Tester [Model : VM 50 PC] | Brinell Hardness Tester [Model : B3000] | Computerised Brinell Hardness Tester [Model : B3000-PC] | Computerised Brinell Image Analysis System [B.I.A.S] | Computerised Fully Automatic Brinell Hardness Testing Machines [Model : B3000-PC-FA] | Portable Hardness Tester [Model : PR 1]  • SAROJ make Rockwell Hardness Testing Machines | Hardness Testers [Models : RAS, RAB-1, RAB-250, Twin]  • SAROJ make Brinell Hardness Tester | Brinell Hardness Tester [Model : B 3000 [O]] | Brinell Hardness Tester [Model : B 3000 [H]]  • Dynamic Balancing Machines with Microprocessor Based Measuring Panel | Dynamic Balancing Machine Model HDM | Dynamic Balancing Machine Model HDCM | Dynamic Balancing Machine Model HDVM & HDVTM  • Computerised MicrovickersHardness Tester [Model : MV-1 PC]