Vickers Hardness Tester (Model : VM-50 )

 
Vickers Hardness Tester (Model : VM-50 )
Vickers Hardness Tester (Model : VM-50 )
 
Features :
 
• Testing range is very wide, from soft metal such as lead, upto the hardest, like hardeness steel.
• Same hardness number is obtained on the same specimen, regardless of the load applied.
• The indication is tiny and allows testing of a precision finished part.
• Loading and unloading cycle is motorised.
• Thin sheet metal is perfectly tested because the load applied is very small.
• Built-in projection screen to get accurate results.
 
Specifications :
 
'FIE' Vickers Hardness Tester is a simple and accurate means to produce and measure the diamond indentation.

These testers are suitable for measuring the hardness of precision metallic parts with wide testing range from soft to hard and their accurate results are widely acclaimed. These testers strictly conform to IS : 1754 and ISO 6507-2.
 
Technical Data :
 
Test Loads
5, 10, 20, 30, 50 kgf
Optical Magnification
70 X
Optical Measuring Range (mm)
0.1 to 1.0
Maximum Test Height (mm)
200
Scale Least Count (mm)
0.001
Throat Depth (mm)
135
Machine Dimension (mm)
L 585 x W 290 x H 860
Weight (approx)
70 kg
Power Supply
220 VAC, 50Hz, 1-Phase
 
Number of special acceessories are available on request and as per special requirement.
 
Construction :
 
The robust machine frame is designed to accommodate the high precision loading system and an optical projection screen.

Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond penetrator by means of a lever and weights. After a specific lapse of time, the load is removed automatically.

The objective is indexed with the test piece and the diamond indentation is projected on the measuring screen.

The diagonals of the indentation can be measured by means of the micrometer screw of the projection screen. 
 
Standard Accessories :
 
1.
Standard Text Block
1 No.
2.
Diamond Penetrator
1 No.
3.
Weights
1 Set
4.
Flat Anvil
1 No.
5.
Vee-Type anvil (Small & Big)
1 No. each
6.
Spanners
1 set
7.
Electronic Cord
1 No.
8.
Instruction Manual
1 Book
 
Due to constant Research and Development, Specifications and Features are subject to change without notice.
 
 
 
 

Universal Testing Machines | Mechanical Type Universal Testing Machines | Electronic Type Universal Testing Machines | Electronic UTM [Model : UTE] | Electronic UTM [Model : UTES (Servo)] | Electronic Universal Testing Machines [Model : UTE 40 HGFL]  • Electro-Mechanical Universal Testing Machines |Model Unitek 9400 Series with PC Interface & Real Time Graph [Panel / PC Controlled] | Model Unitek 9700 Series with Interface & Real Time Graph [Panel / PC Controlled]  • Electro-Mechanical PC Control Universal Testing Machines | Unitek 9500 Series | Mechanical Extensomedter [Model : EM-1] | Electronic Mechanical Extensometer [Model : EE-2]  • Compression Testing Machines | Electronic Compression Testing Machines | Electronic Four Column Compression Testing Machines [Model : CTE 200 & 300 4C]  • Spring Testing Machines (Model : STE) | Laminated Spring Testing Machines  • Torsion Testing Machines | Electronic Torsion Testing Machines [Model : TTE]  • Erichsen Testing Machines  • Impact Testing Machines [Model : IT-30 & IT-30 (D)]  • Hardness Testing Machines | Rockwell Hardness Testing Machines | Hardness Testing Machines Series - RASN [For Rockwell, Rockwell Superficial & Brinell Testing] | Hardness Testing Machines For Rockwell, Rockwell Superficial & Rockwell cum Brinell Testing [Series : RASNE] | Vickers Hardness Tester [Model : VM-50] | Computerised Hardness Tester [Model : VM 50 PC] | Brinell Hardness Tester [Model : B3000] | Computerised Brinell Hardness Tester [Model : B3000-PC] | Computerised Brinell Image Analysis System [B.I.A.S] | Computerised Fully Automatic Brinell Hardness Testing Machines [Model : B3000-PC-FA] | Portable Hardness Tester [Model : PR 1]  • SAROJ make Rockwell Hardness Testing Machines | Hardness Testers [Models : RAS, RAB-1, RAB-250, Twin]  • SAROJ make Brinell Hardness Tester | Brinell Hardness Tester [Model : B 3000 [O]] | Brinell Hardness Tester [Model : B 3000 [H]]  • Dynamic Balancing Machines with Microprocessor Based Measuring Panel | Dynamic Balancing Machine Model HDM | Dynamic Balancing Machine Model HDCM | Dynamic Balancing Machine Model HDVM & HDVTM  • Computerised MicrovickersHardness Tester [Model : MV-1 PC]


 
Designed by : MID   Hosted by : GID   Promoted by : PBD