COMPUTERISED FULLY AUTOMATIC BRINELL HARDNESS TESTING MACHINE
[ MODEL - B3000PCFA]
   
 
 

 

VICKSYS Computerised Vickers Hardness Tester (Model : VM-50 PC)

 
VICKSYS Computerised Vickers Hardness Tester (Model : VM-50 PC)
VICKSYS Computerised Vickers Hardness Tester (Model : VM-50 PC)
Features :
 
Fully Computerised (PC Based) Vickers Hardness Machine.
Direct and accurate measurement of Vickers Hardness number using "State of the Art" image processing technology.
Wide testing range : from soft metal up to hardest.
High accuracy and repeatability of measurement at all loads.
Faster measurement yielding to higher productivity.
Small size of indentation makes it a non destructive testing on finished components.
Motorised loading and unloading cycle.
Small loads allow testing of thin sheet metals.
Advanced Window XP based software :
 
Latest GUI Features : 
• User friendly software with Windows Features.
• Online indentation setting and focusing on PC monitor.
• Advance image processing : Algorithms implemented for precise calculation of hardness numbers with various options to cover all ranges of specimen.
Batch file Processing : Option for Data, storage and reports generation.
Statistical Evaluation : Software forcalculating standard deviation, mean, medium, histogram etc. 
• Wide options in calibration mode.
- Calibration / Verification on PC monitor makes easier to operate.
 
 
 
Specifications :
 
'FIE' Computerised Hardness Tester is a simple and accurate means to produce automatically measure the diamond indentation to give Vickers hardness numbers.

These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard and their accurate results are widely acclaimed. These testers strictly confirm to IS 1754 - 2002.
 
Technical Data :
 
  Total Loads
  5, 10, 20, 30, 50, kgf
  Max. Test Height(mm)
  200
  Scale least count(mm)
  Diagonal measuring range (mm)
  0.001
  0.05 to 0.4
  Throat depth(mm)
  135
  Machine Dimension (Approx.)mm
  L 585 x W 290 x H 860
  Weight (Approx.)mm
  70 kg.
  Power Supply
  220VAC, 50Hz, 1Phase
 
PC requirements :
• Intel Pentium IV 2.00 GHz or above processor is recommended.
• Microsoft Windows 98SE or above (Recommended XP)
• System Ram : 128 MB or above (Recommended 256 MB)
• One RS 232 (serial) port. (PC not included in standard scope of supply)
 
Construction :
The robust machine frame is designed to accommodate the high precision loading.

Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of a lever and weights. After a specific lapse of a time the load is removed automatically. The image is digitized using a CCD camera fitted on the machine and is captured by PC. The diagonals of the indentation are automatically measured by PC to give the Vickers Hardness Number.
 
Accessories :
 
1.
Standard Test Block
1 No.
2.
Diamond indentor
1 No.
3.
Weights
1 Set
4.
Flat Anvil
1 No.
5.
Vee-type anvil ( Small & Big )
1 No. each
6.
Spanners
1 Set
7.
Electric Cord & PC interface cord
1 No. each
8.
Video Capture
1 No.
9.
Vicksys software CD
1 No.
10.
Instruction Manual
1 Book
 
Number of special accessories are available on request and as per special requirement.
Due to constant Research and Development, Specifications and Features are subject to change without notice.
 
 
 

  
 

Universal Testing Machines | Mechanical Type Universal Testing Machines | Electronic Type Universal Testing Machines | Electronic UTM [Model : UTE] | Electronic UTM [Model : UTES (Servo)] | Electronic Universal Testing Machines [Model : UTE 40 HGFL]  • Electro-Mechanical Universal Testing Machines |Model Unitek 9400 Series with PC Interface & Real Time Graph [Panel / PC Controlled] | Model Unitek 9700 Series with Interface & Real Time Graph [Panel / PC Controlled]  • Electro-Mechanical PC Control Universal Testing Machines | Unitek 9500 Series | Mechanical Extensomedter [Model : EM-1] | Electronic Mechanical Extensometer [Model : EE-2]  • Compression Testing Machines | Electronic Compression Testing Machines | Electronic Four Column Compression Testing Machines [Model : CTE 200 & 300 4C]  • Spring Testing Machines (Model : STE) | Laminated Spring Testing Machines  • Torsion Testing Machines | Electronic Torsion Testing Machines [Model : TTE]  • Erichsen Testing Machines  • Impact Testing Machines [Model : IT-30 & IT-30 (D)]  • Hardness Testing Machines | Rockwell Hardness Testing Machines | Hardness Testing Machines Series - RASN [For Rockwell, Rockwell Superficial & Brinell Testing] | Hardness Testing Machines For Rockwell, Rockwell Superficial & Rockwell cum Brinell Testing [Series : RASNE] | Vickers Hardness Tester [Model : VM-50] | Computerised Hardness Tester [Model : VM 50 PC] | Brinell Hardness Tester [Model : B3000] | Computerised Brinell Hardness Tester [Model : B3000-PC] | Computerised Brinell Image Analysis System [B.I.A.S] | Computerised Fully Automatic Brinell Hardness Testing Machines [Model : B3000-PC-FA] | Portable Hardness Tester [Model : PR 1]  • SAROJ make Rockwell Hardness Testing Machines | Hardness Testers [Models : RAS, RAB-1, RAB-250, Twin]  • SAROJ make Brinell Hardness Tester | Brinell Hardness Tester [Model : B 3000 [O]] | Brinell Hardness Tester [Model : B 3000 [H]]  • Dynamic Balancing Machines with Microprocessor Based Measuring Panel | Dynamic Balancing Machine Model HDM | Dynamic Balancing Machine Model HDCM | Dynamic Balancing Machine Model HDVM & HDVTM  • Computerised MicrovickersHardness Tester [Model : MV-1 PC]