Manufacturer and Exporter of : Auto-correction Vertical Balancing Machine

  • fietest
fietest

Dynamic Balancing Machine

Balance Tech VAC

Request a Quote
Custom Solutions Request

Select Variant


Auto Correction Vertical Balancing Machine

With Touch Screen Based Measuring Panel Hard Bearing Models : BALANCE TECH VAC -

Technical Description

Machine Model Balance Tech VAC are vertical type single plane hard bearing balancing machine provided with -

  1. DSP based measuring panel.
  2. Servo Drill head for correction.
  3. Ideal for disc shaped rotors such as clutch plates, flywheels, fan blades, Magnetos, Grinding wheels, impellers etc.

Features - Dynamic Balancing Machine

 

  • Standard Features of control panel
    1. DSP controller based processing.
    2. Digital display for unbalance indication.
    3. Digital display for RPM Indication.
    4. Auto –Stop.
    5. Simultaneous indication.
    6. On screen keyboard.
    7. Tolerance indicators.
    8. Data Storage.
  • Operation Cycle - The working cycle is fully automatic with unbalance indication while rotor running and after stopping the balancing cycle it precisely rotates to its correction position, further Vertical drill head cycle starts for correction and asks for following parameters -
    1. Material Density.
    2. Drill Size.
    3. Maximum drill depth.
    4. Allowed no. of holes.
    5. Center distance between two hole.

Technical Specifications - Dynamic Balancing Machine

 

MODELS UNIT Balance Tech VAC-10 Balance Tech VAC-30 Balance Tech VAC-50 Balance Tech VAC-100 Balance Tech VAC-300
Weight of Rotors kg 0.5-10 1-30 1.5-50 3-100 10-300
Max. Diameter of Rotor mm 400 500 500 600 700
*Balancing Speed (n) RPM 1000 750 600 500 350
Power of Drive Motor HP 0.75 1.5 1.5 3 7.5
Acceleration Capability (Gd²N²) kgm²n² 0.37x106 0.88x106 0.88x106 3.9x106 14.12x106
Min. Unbalance Mass Measured g 0.1 0.1 0.1 0.1 1
Max. Unbalance Mass Measured kg 4 4 4 4 4
Unbalance Reduction Ratio % 95 95 95 95 95
Min. Achievable Unbalance per Rotor wt. (For max. Rotor wt.) Microns or gmm/kg 5 5 5 5 5

*The balancing speed depends upon selection of the rotor diameter, where drive is to be given and the motor pulley diameter.

• All the machines above operate on mains supply of 400 to 440 V, 3Ø, 50 Hz.

• Due to constant R&D, specifications and features are subject to change without notice. The dimensions given above are approximate.

*PC & Printer is not in our standard scope of supply.

Downloads - Dynamic Balancing Machine

 

fuel instruments & engineers pvt. ltd