Manufacturer and Exporter of : Fatigue Testing Machine, Fatigue Tester
Description - Fatigue Testing Machine
Fatigue failure is a phenomenon in which a component fail due to repeated loading. Repeated loading condition in a component arrives when the stresses in it due to the load applied vary of fluctuate between maximum and minimum values.
The machine member subjected to replaced loading have been found to fail at stresses which are very much below the ultimate strength and very often below the yield strength.
Fatigue testing machine is used for the test the fatigue strength of material by various material manufacturer, institute and laboratories.
On this basis we can plot the S-N diagram for that particular material. Basically this is rotating beam type machine in which load is applied in reverse bending direction.
In this machine test material specimen of diameter 8mm is held at the two ends with the help of collets, then load is applied at center for uniform bending moment and rotate it with 4200 RPM by motor.
During each revolution reverse stresses in all fibers of specimen is produced. Bending moment is applied with lever mechanism system so various weight can be easily replaced.
After completing the test process whatever number of revolution taken by specimen up to its break point is displayed on the digital counter.
The machine working phenomenon meets all the requirement of IS 5075-1959.
Features - Fatigue Testing Machine
- able type model, no need of foundation
- Easy to operate and adjust the load for bending moment
- Compact and sturdy design.
- Test as per IS 5075.
- User friendly.
Technical Specifications - Fatigue Testing Machine
| Maximum Bending Moment | 200 kg. cm. |
| Bending Moment Adjust | 100, 150 & 200 kg. cm. |
| Gripping Specimen Diameter | 12 mm |
| Test Specimen Diameter | 8 mm |
| Rotating Speed | 4200 RPM |
| Accuracy of Applied Bending Moment | ±1% |
| Revolution Counter | Digital (8 Digit) |
| Power Required | 0.5 HP |
| Motor Specifications | 3 ph, 0.5 HP, 440 V, 50 Hz |
| Machine Dimensions (LxWxH) | 1000x560x900 mm |
| Test Specimen Mounting Height | 850 mm |
| Overall Weight | 150 kg. |
Downloads -
