Manufacturer and Exporter of : Hardness Testing Machine (Hardness Tester), Rockwell and Combined Hardness Tester, Vickers Hardness Tester, Brinell Hardness Tester
Hardness Testing Machine (Hardness Tester)
For Auto Turret Machine after clicking on cycle start button indexing mechanism will operate automatically & loading mechanism starts, once loading finishes again indexing mechanism will positioned at measuring station.
Features - Hardness Testing Machine
- Testing range is very wide, from soft metal such as lead, upto the hardest, like hard steel.
- Same hardness number is obtained on the same specimen, regardless of the load applied.
- The indication is tiny and allows testing of a precision finished part.
- Loading and unloading cycle is motorized.
- Thin sheet metal is perfectly tested because the load applied very small.
- Built-in projection screen to get accurate results.
Application - Hardness Testing Machine
'FIE' Vickers Hardness Tester is a simple and accurate means to produce and measure the diamond indentation.
These Tester are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard and their accurate results are widely acclaimed.
Construction - Hardness Testing Machine
The robust machine frame is designed to accommodate the high precision loading system and an optical projection screen.
Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond indenter by means of a lever and weights. After a specific laps of time, the load is removed automatically. The objective is indexed with the test piece and the diamond indentation is projected on the measuring screen.
The diagonals of the indentation can be measured by means of the micrometer thimble of the projection screen.
Technical Specifications - Hardness Testing Machine
| Test Loads | 5, 10, 20, 30, 50 kgf |
|---|---|
| Optional Test Load | 1 kgf. |
| Optical Magnification | 70 X |
| Optical Measuring Range (mm) | 0.1 to 1.0 |
| Max. Test Height (mm) | 200 |
| Scale least count (mm) | 0.001 |
| Throat Depth (mm) | 135 |
| Machine Dimension (mm) | L585 x W290 x H 860 |
| Weight (Approx.) | 70 kg |
| Power Supply | 220 VAC, 50 Hz, 1 Phase |
Standard Accessories - Hardness Testing Machine
| Standard Test Block | 1 No. |
|---|---|
| Diamond Indenter | 1 No. |
| Weights | 1 Set |
| Flat Anvil | 1 No. |
| Vee – Type Anvil (Small & Big) | 1 No. Each |
| Spanners | 1 Set |
| Electric Cord | 1 No. |
| Halogen Lamp | 1 No. |
| Telescopic Cover | 1 Set |
| Instruction Manual | 1 Book |
Downloads - Hardness Testing Machine
