IT-30, IT-30(D), IT-30(ASTM), Auto Impact-40(ASTM)
IT - 30 :
The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test.
The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy the lower one for Izod testing. On release, the pendulum swings down to break the specimen & the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale.
IT - ASTM :
The impact tester offered with 300 & 400J energy exclusively for Charpy test confirming to ASTM E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard.
The accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied by the NIST, USA. Two sets (Low & high energy-1 Set (4 Nos.) each.) must agree with the normal values within certain tolerance specified.
Auto Impact :
In Auto Impact Tester, the pendulum will lift, the specimen will get loaded and the pendulum will release automatically. Once specimen breaks, the result will display on the digital panel, and auto brakes will apply immediately.
The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On auto release, the pendulum swings down to break the specimen and the energy is absorbed. While doing so, the energy is measured as the difference between the height of drop before rupture and height of rising after rupture of the test specimen and is read on a digital panel in Jules.
Auto Impact - ASTM :
FIE's Charpy pendulum impact testing machine, model: Auto Impact - ASTM serves for conducting Charpy impact testing according to ASTM E-23 standard to determine the behaviour of metallic and non-metallic materials under the impact stresses.
- Fully automatic machine, easy to operate.
- For safety, the machine covered in an enclosure with door interlocks to maximize the operator's safety.
- The high-resolution encoder is fitted in the machine which can read the absorbed energy less than 1J
- Touch-screen HMI
- USB output for data logging
- Thermal printer output
- Manual operation via touch-screen
- Calibration features